Home > BLDC Driver Board >

JYQD-V7.5E BLDC Motor Driver 36-72VDC 500W with PWM Control

Product Categories

Changzhou Bextreme Shell Motor Technology Co.,Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

JYQD-V7.5E BLDC Motor Driver 36-72VDC 500W with PWM Control

Name: JYQDV75E BLDC Motor Driver 3672VDC 500W with PWM Control
Brand: Bextremeshell
Price: 8.90 USD

Wholesale JYQD-V7.5E BLDC Motor Driver 36-72VDC 500W with PWM Control from china suppliers

Place of Origin : Jiangsu, China

Brand Name : Bextremeshell

Model Number : JYQD-V7.5E

MOQ : 1

Price : $8.90-10.90

Input voltage : 36-72VDC

Rated power : 350W

Max power : 500W

Max current : 15A

Control algorithm : Square wave

Dimensions : 63mm x 42.5mm x 33mm

Speed control : PWM/0-5V

Speed feedback : Yes

Working temperature : -10℃ to 60℃

PWM frequency : 1K-20KHZ

PWM duty cycle : 0-100%

PWM amplitude : 5V

Control port distance : 2.54mm

Power port distance : 3.96mm

Motor type : Hall sensor motor

Contact Now

BLDC Motor Driver Major Parameters

JYQD-V7.5E BLDC Motor Driver 36-72VDC 500W with PWM Control

Model No.:JYQD-V7.5E

Power Input：36-72VDC

Rated power：350W

Suitability ：Hall sensor motor

Max power：500W

Max curernt: 15A

---------------------------------------------------------------------------

Protection: Over-current, short circuit, over voltage, under voltage, locked rotor, over-heating

Control algorithms: Square wave

Dimensions：63mmx42.5mmx33mm

Speed Control：PWM/0-5V

Speed feedback signal output：Yes

Working temp：-10℃—60℃

BLDC Motor Driver Applications

JYQD-V7.5E BLDC motor driver board is a direct current brushless driver board. It is designed to control DC brushless motors and provide precise speed regulation range from 0 to 100%. The control algorithms of this product are based on square wave which promotes its stability and accuracy. This driver board is suitable for a wide range of applications, such as robot, electric bicycle, electric wheelchair, electric scooter and hub motor. The maximum current of this DC brushless driver board is 15A and it is the ideal choice for those who needs a reliable and efficient motor driver board.

Electric skateboard

Electric scooter

Electric wheelchair

Hoverboard

Drones

Electric unicycle

Electric Moped

Electric go kart

RC car

Industrial robot

Logistics conveyor belt

Automation equipment

CNC machines

Self-propelled lawn mowers

Consumer electronics Home appliances Industrial equipment

BLDC Motor Driver Appearance

Application guidelines
1. Confirm that the voltage and power parameters of the motor not exceed the range as specified.
2. Applicable to hall brushless dc motor with Hall at 120°, not all manufacturers' Hall line sequence are corresponding,
you can adjust the Hall line sequence or motor three-phase line sequence according to the actual situation, to achieve
the best driving effect.
3. JYQD-V7.5E is driver board without housing and heatsink, it can drive the motor below 100 watt without any heatsink,
but needs normal ventilation.
4. The 5V output port on the drive board is forbidden to connect external power equipment. It is only applicable to
external potentiometer or switch for speed adjustment, commutation and enabling operation

BLDC Motor Driver Wiring

1. Control port
5V —Driver board internal output voltage, external potentiometer or switch for speed adjustment and reversing
operation
Z/F —Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or
connect to GND is reverse direction.
VR —Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with
GND when input PWM speed regulation, PWM frequency:1K-20KHZ; Duty cycle 0-100%，PWM amplitude：5V
EL —Enable port control. Connect 5V or disconnect to allow operation, connect GND to stop operation.
Signal— Speed pulse signal output

GND—Used for Driver board internal control

2. Power port
MA ----motor phase A
MB ---- motor phase B
MC---- motor phase C
P- ----DC
P+----DC +

3:Hall sensor port
Ha--- Hall a
Hb---Hall b
Hc---Hall c
GND---GND
5V---5V output

4. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use

5. Control port distance: 2.54mm,Power port distance:3.96 mm
6. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.

BLDC Motor Driver's size

Manufacturing Technique

Packing info

The BLDC motor driver well packed in an individual antistatic bag.

FAQ

1:Whats the Lead time?

Sample:in 5 days

Mass order:in 2-3weeks

2:Whats the MOQ?

1 set for all series products

3:Whats the BLDC motor driver Warranty?

12 month from the date of delivery

4:How is the technical support?

We offer 1-1 service& technical support

Product Tags:

JYQD-V7.5E BLDC Motor Driver 36-72VDC 500W with PWM Control Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Changzhou Bextreme Shell Motor Technology Co.,Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

JYQD-V7.5E BLDC Motor Driver 36-72VDC 500W with PWM Control

JYQD-V7.5E BLDC Motor Driver 36-72VDC 500W with PWM Control

500W BLDC motor driver with PWM

36-72VDC BLDC driver board

PWM control BLDC motor driver

JYQD-V7.5E BLDC Motor Driver 36-72VDC 500W with PWM Control Images